GNU GRUB version 2.02
+----------------------------------------------------------------------------+
|*VEP1400 DiagOS Install |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
Platform : x86_64-dellemc_vep1400_c3538-r0
Version : 3.43.3.81-27
Build Date: 2022-12-08T01:14-08:00
Info: Mounting kernel filesystems... done.
starting to install vep1400 DiagOS
discover: Rescue mode detected. No discover stopped.
[ 13.780626] sd 6:0:0:0: [sdb] No Caching mode page found
[ 13.786096] sd 6:0:0:0: [sdb] Assuming drive cache: write through
ONIE: Executing installer: /diag-installer-x86_64-dellemc_vep1400_c3538-r0-3.43.3.81-27-2022-12-08.bin
Ignoring Verifying image checksum ... OK.
cur_dir / archive_path /var/tmp/installer tmp_dir /tmp/tmp.tAAkeh
Preparing image archive ...sed -e '1,/^exit_marker$/d' /var/tmp/installer | tar xf - OK.
Diag-OS Installer: platform: x86_64-dellemc_vep1400_c3538-r0
platform found vep1400
platform vep1400 is supported.
console port ttyS0
****************************
Select Installation Device
****************************
1.SSD
2.USB Disk
3.eMMC
0.Quit
---------------------------
Please select the device type that DIAG OS will be install on : 3
Install Diag OS on eMMC
Checking device /dev/mmcblk0 size...
ok
ls: /boot/efi/EFI/*: No such file or directory
EDA-DIAG Partiton not found on mmc device /dev/mmcblk0.
Diag OS Installer Mode : INSTALL
Installing diag-os on mmc device
Checking mmc device presence...
ok
Initializing mmc device
Clearing GPT and MBR data structures
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Clearing GPT and MBR data structures...ok
creating GPT disk label
Creating new GPT entries.
The operation has completed successfully.
creating GPT disk label...ok
Creating ESP on partition 1. size 128MB with label EFI System
Creating ESP on partition...ok
Creating file-system(vfat) on esp device /dev/mmcblk0p1 with label EFI System
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.26 (2014-03-07)
Creating file-system(vfat) on esp...ok
Creating diags partition 2 size 2048MB with label EDA-DIAG
Creating diags partition...ok
Creating file-system on diags partition
mke2fs 1.42.13 (17-May-2015)
Discarding device blocks: done
Creating filesystem with 524288 4k blocks and 131072 inodes
Filesystem UUID: 286c218e-ab48-47f1-ab31-98a25bcdb555
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
Creating file-system on diags partition...ok
Mounted /dev/mmcblk0p2 on /tmp/tmp.EZfsLO
Preparing /dev/mmcblk0p2 EDA-DIAG for rootfs install
untaring into /tmp/tmp.EZfsLO
rootfs copy done
Success: Support tarball created: /tmp/tmp.EZfsLO/onie-support-dellemc_vep1400_c3538.tar.bz2
Updating diag-os ver in system-eeprom
Diagos ver 3.43.3.81-27
Deleting TLV 0x2e: Diag Version
Adding TLV 0x2e: Diag Version
Programming passed.
TlvInfo Header:
Id String: TlvInfo
Version: 1
Total Length: 179
TLV Name Code Len Value
-------------------- ---- --- -----
Product Name 0x21 9 EDGE640VN
Part Number 0x22 6 07071K
Serial Number 0x23 20 XXXXXXXXXXXXXXXXXXXX
Base MAC Address 0x24 6 XX:XX:XX:XX:XX:XX
Manufacture Date 0x25 19 08/14/2021 08:37:35
Device Version 0x26 1 1
Label Revision 0x27 3 A00
Platform Name 0x28 22 x86_64-dellemc_edge640
MAC Addresses 0x2A 2 64
Manufacturer 0x2B 5 DNG00
Country Code 0x2C 2 TW
Vendor Name 0x2D 8 Dell EMC
Service Tag 0x2F 7 XXXXXXX
Vendor Extension 0xFD 21 0x00 0x00 0x02 0xA2 0x20 0x78 0x7C 0xE0 0x15 0xA8 0xAA 0x45 0x3F 0x96 0x16 0x65 0x05 0x35 0xD3 0x49 0xC2
Diag Version 0x2E 12 3.43.3.81-27
CRC-32 0xFE 4 0x9495B6ED
Checksum is valid.
[VEP1400-X] Board ID : 0x0a
rootfs install ok
Mounted /dev/mmcblk0p1 on /tmp/tmp.qyptLr
Installing grub for diag-os
done
Updating EFI NVRAM Boot variables...
done
Updating Grub Cfg /dev/mmcblk0p2
clean up..done
INSTALLER DONE...
Please uninstall your USB disk out of box, wait 2 sec
Removing /tmp/tmp.tAAkeh
ONIE: NOS install successful: /diag-installer-x86_64-dellemc_vep1400_c3538-r0-3.43.3.81-27-2022-12-08.bin
ONIE: Rebooting...
This should be not reachable unless something wrong is there!!!!!
Info: BIOS mode: UEFI
Info: Using eth0 MAC address: XX:XX:XX:XX:XX:XX
Info: eth0: Checking link... down.
ONIE: eth0: link down. Skipping configuration.
ONIE: Failed to configure eth0 interface
Starting: klogd... done.
discover: Rescue mode detected. No discover stopped.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: klogd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
umount: can't unmount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
[ 89.580382] reboot: Restarting system